Gain reduction

Come talk about our DIY amp project...in english !
Avatar du membre
slajeune
G5 bidouilleur
G5 bidouilleur
Messages : 9
Enregistré le : 28 juil. 2006, 2:00

Message non lu par slajeune »

Hi Steven,

thanks for the update. With all of the info, I would go with a 5751. This might be what you are looking for. The ECC82 has a gain factor that is way too low (20 vs 100!). A 5751 or a 12AT7 might get you close to what you are looking for.

Cheers,
Stephane.
Avatar du membre
sjhusting
G5 bidouilleur
G5 bidouilleur
Messages : 20
Enregistré le : 22 mars 2006, 1:00

Message non lu par sjhusting »

yes, i thought the ecc81 was a good compromise. I will try the 5751 from my Fender next time I am in the band practice room. And I will still put a switch on the bypass cap of v1a

thanks for all the input.

steven
Avatar du membre
sjhusting
G5 bidouilleur
G5 bidouilleur
Messages : 20
Enregistré le : 22 mars 2006, 1:00

Message non lu par sjhusting »

Cathode bypass works wonders. I removed the effects loop (never used it anyway) and put a switch in one of the holes. Put the ecc83 back in ... perfect. And my cold solder joint is gone. Now I have to fill the other hole, maybe a master?

thx again

steven
Avatar du membre
McColson
Admin du site
Admin du site
Messages : 7864
Enregistré le : 07 nov. 2004, 1:00
Localisation : Dammartin-sur-Tigeaux
Contact :

Message non lu par McColson »

Yes you can replace the R17 (1M) by a 1M log pot, and you search a clean sound, a master isn't bad idea.
Répondre